Jeep 2000 (6 cyl)

Functions
void	triggerSetup_Jeep2000 (void)
void	triggerPri_Jeep2000 (void)
void	triggerSec_Jeep2000 (void)
uint16_t	getRPM_Jeep2000 (void)
int	getCrankAngle_Jeep2000 (void)
void	triggerSetEndTeeth_Jeep2000 (void)

Detailed Description

Jeep 2000 - 24 crank teeth over 720 degrees, in groups of 4 ('91 to 2000 6 cylinder Jeep engines). Crank wheel is high for 360 crank degrees. Quite similar to the 24X setup. As we only need timing within 360 degrees, only 12 tooth angles are defined. Tooth number 1 represents the first tooth seen after the cam signal goes high. www.speeduino.com/forum/download/file.php?id=205

Function Documentation

getCrankAngle_Jeep2000()

int getCrankAngle_Jeep2000

(

void

)

Here is the call graph for this function:

Here is the caller graph for this function:

getRPM_Jeep2000()

uint16_t getRPM_Jeep2000

(

void

)

Here is the call graph for this function:

Here is the caller graph for this function:

triggerPri_Jeep2000()

void triggerPri_Jeep2000

(

void

)

Here is the call graph for this function:

Here is the caller graph for this function:

triggerSec_Jeep2000()

void triggerSec_Jeep2000

(

void

)

Here is the caller graph for this function:

triggerSetEndTeeth_Jeep2000()

void triggerSetEndTeeth_Jeep2000

(

void

)

Here is the caller graph for this function:

triggerSetup_Jeep2000()

void triggerSetup_Jeep2000

(

void

)

Here is the call graph for this function:

Here is the caller graph for this function: